NEXCONEC 0.5U 24 ports unloaded keystone patch panel is the special designed patch panel for use in high density network deployment, allows flexibility for the users during installations. It gives you the benefits of only using ports required by installing the desired number of jacks into the frame.
This unloaded keystone jack patch panel comes with cable ties, cage nuts and rear cable management bar as standard.

NEXCONEC 0.5U Cat6 STP 24 ports keystone patch panel is the special designed patch panel for use in high density network deployment, allows flexibility for the users during installations. It gives you the benefits of only using ports required by installing the desired number of jacks into the frame.
With the silkscreen printed port identification number which help the end user to recognize the ports while/after installation in the rack. Each single piece of Category 6 STP keystone jacks is well sit in each port of the patch panel, which gives great flexibility to installations on site and conform to ANSI/TIA/EIA 568A-B.2.2001, ISO/IEC11801:2002 and EN50173-2 standards.

NEXCONEC 0.5U Cat6 UTP 24 ports keystone patch panel is the special designed patch panel for use in high density network deployment, allows flexibility for the users during installations. It gives you the benefits of only using ports required by installing the desired number of jacks into the frame.
With the silkscreen printed port identification number which help the end user to recognize the ports while/after installation in the rack. Each single piece of Category 6 UTP keystone jacks is well sit in each port of the patch panel, which gives great flexibility to installations on site and conform to ANSI/TIA/EIA 568A-B.2.2001, ISO/IEC11801:2002 and EN50173-2 standards.

NEXCONEC 1U 16 ports unloaded shielded keystone patch panel allows flexibility for the users during installations. It gives you the benefits of only using ports required by installing the desired number of jacks into the frame.
With the port identification number, which help the end user to recognize the ports while/after installation. When mounted with NEXCONEC unshielded or shielded keystone jacks for Cat 5E, Cat 6 and Cat 6A, your completed panel will conform to ANSI/TIA/EIA 568A B.2.2001, ISO/IEC11801:2002 and EN50173 2 standards.

NEXCONEC 1U 24 ports unloaded shielded keystone patch panel allows flexibility for the users during installations. It gives you the benefits of only using ports required by installing the desired number of jacks into the frame.
With the port identification number, which help the end user to recognize the ports while/after installation. When mounted with NEXCONEC shielded keystone jacks for Cat 5E, Cat 6 and Cat 6A, your completed panel will conform to ANSI/TIA/EIA 568A-B.2.2001, ISO/IEC11801:2002 and EN50173-2 standards.
This unloaded keystone jack patch panel comes with cable ties, cage nuts and rear cable management bar as standard.

NEXCONEC 1U 48 ports unloaded UTP/STP keystone patch panel allows flexibility for the users during installations. It gives you the benefits of only using ports required by installing the desired number of jacks into the frame.
With the port identification number which help the end user to recognize the ports while/after installation. When mounted with NEXCONEC shielded/unshielded keystone jacks for Cat 5E, Cat 6 and Cat 6A, your completed panel will conform to ANSI/TIA/EIA 568A-B.2.2001, ISO/IEC11801:2002 and EN50173-2 standards.
This unloaded keystone jack patch panel comes with cable ties, cage nuts and rear cable management bar as standard.

NEXCONEC 1U 24 ports unloaded keystone patch panel allows flexibility for the users during installations. It gives you the benefits of only using ports required by installing the desired number of jacks into the frame. The 4 front modules are removable which provides the easier and faster installation of keystone jacks.
With the port identification number which help the end user to recognize the ports while/after installation. When mounted with NEXCONEC unshielded keystone jacks for Cat 5E, Cat 6 and Cat 6A, your completed panel will conform to ANSI/TIA/EIA 568A-B.2.2001, ISO/IEC11801:2002 and EN50173-2 standards.
This unloaded keystone jack patch panel comes with cable ties, cage nuts and rear cable management bar as standard.

NEXCONEC 1U 24 ports angled unloaded keystone patch panel allows flexibility for the users during installations. It gives you the benefits of only using ports required by installing the desired number of jacks into the frame. With the front angular design, this panel will help the cable routed to left and right separately by increasing the cable bending radius.
With the silkscreen printed port identification number which help the end user to recognize the ports while/after installation. When mounted with NEXCONEC keystone jacks for Cat 5E, Cat 6 and Cat 6A, your completed panel will conform to ANSI/TIA/EIA 568A-B.2.2001, ISO/IEC11801:2002 and EN50173-2 standards.
This angled keystone jack patch panel comes with cable ties, cage nuts and rear cable management bar as standard.

NEXCONEC Category 5e Printed Circuit Board (PCB) Unshielded Twisted Pair (UTP) patch panels conform to class D performance. The PCB is fully sealed for extra protection, and in-line IDC blocks. Wiring diagram assists termination to either 568A or 568B wiring standards. Available in 1U 24 ports or 2U 48 ports. All panels are supplied with rear cable management bars and fixings.

NEXCONEC Category 5E UTP keystone jack patch panels are specifically designed and manufactured to deliver robust standards-based performance ensuring optimum bandwidth for today’s high-speed network applications. The patch panel is specifically designed to fit NEXCONEC Category 5e UTP keystone jacks.
Each single piece of Category 5e UTP keystone jacks is well sit in each port of the patch panel which gives great flexibility to installations on site.

NEXCONEC Category 6 Printed Circuit Board (PCB) Shielded Twisted Pair (STP) patch panels conform to class E performance. Backwards compatible with category 5e distribution systems. The PCB is fully sealed for extra protection, and in-line IDC blocks. Wiring diagram, assists termination to either 568A or B wiring standards. Available in 1U 24 ports only. All panels are supplied with rear cable management bars and fixings.

NEXCONEC Category 6 Printed Circuit Board (PCB) Unshielded Twisted Pair (UTP) patch panels conform to class E performance. Backwards compatible with category 5e distribution systems. The PCB is fully sealed for extra protection, and in-line IDC blocks. Wiring diagram, assists termination to either 568A or B wiring standards. Available in 1U 24 ports or 2U 48 ports. All panels are supplied with rear cable management bars and fixings.

NEXCONEC Category 6 STP keystone jack patch panels are specifically designed and manufactured to deliver robust standards-based performance ensuring optimum bandwidth for today’s high-speed network applications. The patch panel is specifically designed to fit NEXCONEC Category 6 STP keystone jacks.

NEXCONEC Category 6 UTP keystone jack patch panels are specifically designed and manufactured to deliver robust standards-based performance ensuring optimum bandwidth for today’s high speed network applications. The patch panel is specifically designed to fit NEXCONEC Category 6 UTP keystone jacks.
Each single piece of Category 6 UTP keystone jacks is well sit in each port of the patch panel which gives great flexibility to installations on site.

NEXCONEC Category 6A STP keystone jack patch panels are specifically designed and manufactured to deliver robust standards-based performance ensuring optimum bandwidth for today’s high speed network applications. The patch panel is specifically designed to fit NEXCONEC Category 6A STP keystone jacks.

NEXCONEC Category 6A STP feed-through adapter patch panels are specifically designed and manufactured to deliver robust standards-based performance ensuring optimum bandwidth for today’s high-speed network applications. Category 6A feed-through adapters support all applications designed for Class EA networks as defined within ISO/IEC 11801:2011 including 10GBASE-TX (10 Gigabit Ethernet).

NEXCONEC Category 6A UTP keystone jack patch panels are specifically designed and manufactured to deliver robust standards-based performance ensuring optimum bandwidth for today’s high-speed network applications. The patch panel is specifically designed to fit NEXCONEC Category 6A UTP keystone jacks.
Each single piece of Category 6A UTP keystone jacks is well sit in each port of the patch panel which gives great flexibility to installations on site.

NEXCONEC Category 6A UTP/STP 1U 48 ports keystone patch panel allows flexibility for the users during installations. It gives you the benefits of only using ports required by installing the desired number of jacks into the frame.
With the port identification number which help the end user to recognize the ports while/after installation. When mounted with NEXCONEC shielded/unshielded keystone jacks for Cat 6A, your completed panel will conform to ANSI/TIA/EIA 568A-B.2.2001, ISO/IEC11801:2002 and EN50173-2 standards.
This UTP/STP keystone jack patch panel comes with cable ties, cage nuts and rear cable management bar as standard.

The NEXCONEC® Category 6A 1U 48 Ports STP Mini Feed Through Adapter Patch Panel are expertly designed and manufactured to deliver superior, standards-based performance, ensuring optimal bandwidth for today's high-speed network applications. These Category 6A mini feed-through adapters support all applications intended for Class-EA networks as defined by ISO/IEC 11801:2011, including 10GBASE-TX (10 Gigabit Ethernet).
This versatile patch panel allows you to utilize only the necessary ports by installing the desired number of jacks into the frame. The patch panel includes cable ties, cage nuts, and a rear cable management bar as standard accessories.